1) Locate and clean the area where the Rocker is to be installed. 2) Test fit the Rocker and align the counter sunk areas on the top side of the Rocker to the bottom of the car.
Rocker Supported
3) Support Rocker so that it is flush with the bottom of the car. 4) Drill holes using a 5/32 drill bit. 5) Remove Rocker.
Gasket Sealer
Rocker with Gasket Sealer Bead
6) Optional: Place a bead of Gasket Sealer along the entire length of the top of the Rocker. 7) Place Rocker back on the car and attach with supplied hardware.
Rocker Protector Installed
Congratulations, you are finished and the underside of your Corvette is now protected from damage!
Disclaimer
These instructions are provided for information purposes only. Do not attempt installation of any CCA part if you are not a qualified mechanic.
For proper jacking instructions for your Corvette, please consult your owners manual.
Custom Corvette Accessories accepts no responsibility of damage to your vehicle during installation of our parts and accessories.
Custom Corvette Accessories accepts no responsibility for damage to your vehicle while using our installed parts during operation of your vehicle.
Custom Corvette Accessories suggests that you contract a qualified mechanic for installation of all parts and accessories.
