1) 5/32 Drill bit 2) Drill 3) Center Punch 4) Gasket Sealer (optional) Installation of your CCA skid plates is simple and should take less than 30 minutes.
1) Place you CCA Skid Plate against the radiator support and mark holes on the frame. 2) Using a center punch, tap a starter location so the drill bit will not walk when you start drilling. 3) Drill holes in frame 4) Apply a bead of Gasket sealer to the back of the skid plate, let set for recommended amount of time. 5) Place Skid Plate in place and secure with included hardware.
Disclaimer
These instructions are provided for information purposes only. Do not attempt installation of any CCA part if you are not a qualified mechanic.
For proper jacking instructions for your Corvette, please consult your owners manual.
Custom Corvette Accessories accepts no responsibility of damage to your vehicle during installation of our parts and accessories.
Custom Corvette Accessories accepts no responsibility for damage to your vehicle while using our installed parts during operation of your vehicle.
Custom Corvette Accessories suggests that you contract a qualified mechanic for installation of all parts and accessories.
